Allgrip Y Woodscrew 6.0 x 150mm, CSK, supplied in a box of 100.
Countersunk Pozi woodscrews are the general purpose screw for timber, joinery, chipboard and MDF. The countersunk head sits flush and the Pozi drive gives a positive grip with the bit.
Pre-drill hardwoods and near board edges, and drive with a Pozi bit at a steady speed.
Chipboa 4 x 16mm, CSK Pozi, A2 Stainless Steel, supplied in a pack of 500.
Countersunk Pozi woodscrews are the general purpose screw for timber, joinery, chipboard and MDF. The countersunk head sits flush and the Pozi drive gives a positive grip with the bit.
Pre-drill hardwoods and near board edges, and drive with a Pozi bit at a steady speed.
Conmetall Wire Rope Grip 6mm.
Wire rope grips and clamps terminate and join wire rope for fencing, guy lines and rigging.
Fit the saddle on the live side of the rope and use the number of grips recommended for the rope diameter. Supplied in a barcoded Conmetall retail prepack.
Frame Fixings M10 x 135mm, sold singly.
Frame fixings anchor window frames, door frames, battens and skirtings directly to masonry in one operation. Drill through the frame and into the wall, insert the plug and drive the screw to expand it and pull the frame tight.
The nylon sleeve is corrosion free and will not seize in damp conditions.
Frame Fixings M10 x 80mm, sold singly.
Frame fixings anchor window frames, door frames, battens and skirtings directly to masonry in one operation. Drill through the frame and into the wall, insert the plug and drive the screw to expand it and pull the frame tight.
The nylon sleeve is corrosion free and will not seize in damp conditions.
Heavy Garage Door Bolt Hsg (1pc+cwf) 12in.
Door furniture for internal and external doors in a range of finishes.
Fit with the screws supplied or matching finish screws and check the alignment of keeps and strikes before final fixing.
Senco Rosett Light (410333) Hook Blue, supplied in a pack of 2.
Rosett fixings are a one piece cavity anchor that drills and fixes through plasterboard or hollow block in a single operation. The screw thread expands the fixing behind the board for a secure hold.
Used for battens, brackets and fixtures on hollow walls.
Sink Strainers - 32 41mm, White.
General purpose fixings and hardware in a barcoded Bonus Bag retail prepack, ready for the shop wall or the van.
Supplied in a barcoded Bonus Bag retail prepack.
Allgrip Through Bolts 10 x 120mm, BZP, supplied in a pack of 4.
Through bolt wedge anchors are a heavy duty expansion fixing for solid concrete, brick and stone. The bolt is driven through the fixture into the drilled hole and the expansion clip locks against the sides as the nut is tightened. Used for fixing steelwork, racking, machinery bases, gate posts and structural brackets.
Drill to the anchor diameter, clear the dust and torque the nut to the stated setting. Supplied in a barcoded Allgrip retail prepack.
Allgrip Coach Screws 10 x 100mm, BZP, supplied in a pack of 5.
Coach screws are a heavy gauge timber screw with a hex head for spanner or socket driving and a coarse thread for a strong grip in wood. Used for structural timber fixing: sleepers, gate posts, joist hangers and heavy brackets.
Pre-drill a pilot hole to avoid splitting and to make driving easier. Supplied in a barcoded Allgrip retail prepack.
Allgrip Woodscrew No.10 x 1in, Round, Japanned, Black, supplied in a pack of 25.
Countersunk Pozi woodscrews are the general purpose screw for timber, joinery, chipboard and MDF. The countersunk head sits flush and the Pozi drive gives a positive grip with the bit.
Pre-drill hardwoods and near board edges, and drive with a Pozi bit at a steady speed. Supplied in a barcoded Allgrip retail prepack.
Allgrip Masonry Nails 3.0 x 60mm, supplied in a pack of 12.
Hardened masonry nails drive directly into brick, block and mortar joints without drilling or plugging. Used for fixing battens, cable clips, straps and light brackets to masonry.
Strike squarely with a club hammer and wear eye protection. Supplied in a barcoded Allgrip retail prepack.
Allgrip Frame Fixings 10 x 140mm, Nylon, supplied in a pack of 6.
Frame fixings anchor window frames, door frames, battens and skirtings directly to masonry in one operation. Drill through the frame and into the wall, insert the plug and drive the screw to expand it and pull the frame tight.
The nylon sleeve is corrosion free and will not seize in damp conditions. Supplied in a barcoded Allgrip retail prepack.
Allgrip Cup Square Hex Bolts in A2 stainless steel, available in M8, M10 and M12 diameters across a range of lengths, each supplied in a barcoded Allgrip retail prepack.
Cup square bolts have a smooth domed head with a square shoulder that bites into timber as the nut is tightened, so the bolt cannot spin and no spanner is needed on the head side. A2 stainless steel resists rust and staining indoors and out, making it the right choice for gates, fencing, decking frames, sleepers and outdoor timber structures where a zinc plated bolt would corrode or mark the timber.
Pre-drill a clearance hole through both timbers, insert the bolt and tighten from the nut side with a spanner or socket. Select the size below.